Heatilator Eco-Choice WS22 Freestanding Wood Heater

Heating

Enquire for Price

RRP incl GST

A large freestanding wood heater with step-top cooking surface and generous firebox — the Heatilator Eco-Choice WS22 delivers up to 9.4 kW warmth for bigger living areas. Enquire at Wignells; flue, floor protector, optional flue shield and installation are quoted separately.

Show More
Wood
Up to 9.4 kW max average heat output
660 mm appliance width
Price shown is for the WS22 appliance only. Required accessories and services — including flue kit, floor protector, optional flue-mounted heat shield, installation and accessories — are quoted separately.

The Heatilator Eco-Choice WS22 is a large freestanding wood heater for homeowners who need more heat output and firebox capacity than the WS18. Distributed in Australia via Visionline Fire, it pairs the same Eco-Choice clean-burn technology with a taller step-top body and an active 6 mm cook surface. If your living area is larger — open plan, high ceilings, or a home that needs sustained winter warmth — the WS22 is the step-up freestanding model in the Eco-Choice range.

Picture a fire that carries from morning coffee through to evening — wide door opening, single-lever air control, and up to twelve hours burn time per load on low when fuel and operation suit. Primary and secondary combustion and an air-wash system support cleaner burns and less glass cleaning, without a catalytic converter to maintain. The WS22 suits bigger lounges and family zones where a medium stove would be working too hard.

Freestanding wood heating is a long-term decision — room size, flue path, floor protector layout and optional heat shielding all matter. Wignells can help you compare WS18, WS22 and WINS18 insert options and coordinate quoting with your installer. Visit our Melbourne showroom to discuss the WS22 before you commit. For technical data, see the Features, Product Specifications and Installation Specifications tabs on this page.
Product familyEco-Choice Series — Freestanding Wood Heater
ModelWS22-AU
Step-top designYes — 6 mm active cook surface with dual cooking zones
Cast iron doorYes — large ash lip
Steel firebox constructionYes — 4–6 mm steel body
Primary and secondary combustionYes — Quadra-Fire four-point burn technology
Catalytic converterNo
Single-lever air controlYes
Air-wash glass cleaningYes — when operated per manufacturer guidance
Wide door openingYes
Optional blower kitAvailable *(not included)*
Optional flue-mounted heat shieldAvailable — reduces rear clearance to 100 mm with shield *(per install manual Table 3)*
Floor protectorMinimum size required on combustible floors — insulating pad not required when installed to AS/NZS 2918
Approved fuelSeasoned wood — moisture content less than 25% (dry basis)
WetbackNot approved — must not be fitted
Australian standardsTested to AS/NZS 4012, AS/NZS 4013 and AS/NZS 2918
Manufacturer warranty5 years on firebox and heat exchanger *(confirm AU terms with showroom)*
Model WS22-AU Freestanding Wood Heater
Fuel type Wood
Maximum average heat output 9.4 kW *(hardwood)* / 8.1 kW *(softwood)*
Average efficiency 82% *(hardwood)* / 66% *(softwood)*
Peak efficiency Up to 85% *(hardwood — distributor claim)*
Emissions 1.2 g/kg *(hardwood)* / 1.3 g/kg *(softwood)*
Recommended heating area Up to 300 m² *(~30 building squares — varies with insulation, ceiling height and fuel)*
Maximum burn time Up to 12 hours *(on low — varies with fuel and operation)*
Firebox capacity 2.7 cu ft
Maximum log length 560 mm
Appliance width 660 mm
Appliance height 864 mm
Appliance depth 781 mm
Approximate weight 185 kg
Flue spigot size 150 mm *(6″ — tested flue system per AS/NZS 2918)*
Country of manufacture United States of America *(Hearth & Home Technologies)*
Model WS22-AU Freestanding Wood Heater
Installation type Freestanding wood heater on minimum floor protector — parallel or 45° corner positioning per manual
Flue system 150 mm diameter tested flue system per AS/NZS 2918 — minimum 4.6 m above top of floor protector to flue termination
Floor protector Required on combustible floors — minimum front width 800 mm; insulating floor pad not required when compliant to AS/NZS 2918
Rear clearance (minimum) 300 mm — back of unit to rear wall *(default flue kit)* / 100 mm with flue-mounted heat shield
Side clearance (minimum) 400 mm — unit side to side wall
Corner installation 75 mm — firebox corner to corner walls *(with flue shield per Table 4)*
Centre of spigot to rear wall 468 mm minimum *(parallel install, default flue kit)*
Floor protector — front extension 300 mm minimum from front of base to front of floor protector
Flue-mounted heat shield Optional — reduces rear clearance; confirm kit availability with showroom
Building consent Installation to comply with AS/NZS 2918 — building consent typically required in New Zealand; confirm local authority requirements in Australia
Licensed installation Licensed solid-fuel installer; compliance with AS/NZS 2918 and local authority requirements
Flue, floor protector, install & accessories Quoted separately — not included in appliance price
Documentation Install & Owners Manual (WS18-AU / WS22-AU), Product Brochure — Visionline Fire downloads

Complete the Look

Explore accessories designed to complement your wood heater and enhance your home

Products not found.