Escea TFS1000 Freestanding Wood Fireplace

Heating

$6,499 *

RRP incl GST

Escea’s flagship freestanding wood fireplace — a wide flame view, Direct Vent combustion air and a heat-activated Smart Fan for open-plan living up to 220 m². The TFS1000 is the widest in the TFS Series: 750 mm logs, Clean Air Approved performance and optional plinths for a designer freestanding look.

Show More
Wood
8.77 kW max heat output
871 mm firebox opening width
Made in New Zealand
Price shown is for the TFS1000 firebox only. Required accessories and services — including the flue system, plinth and installation — are quoted separately.

wide flagship freestanding wood fire
The Escea TFS1000 is the flagship freestanding wood fireplace in Escea’s TFS Series — the widest model in the line, designed for open-plan living where the fire is the anchor. Made in New Zealand, sleek clean lines and a generous viewing window maximise flame presence without the bulk of a traditional cast-iron stove. At up to 8.77 kW heat output and up to 220 m² heating guidance, it suits larger living zones when operated with well-seasoned hardwood — the TFS choice when TFS650 or TFS850 cannot deliver the width, log length or visual scale your room demands.

Direct Vent, done properly

open-plan flame view
Unlike most traditional wood fires, the TFS1000 uses Escea’s Direct Vent Technology — combustion air is ducted from outside and exhaust returns outdoors, so room air and firebox air do not mix. That means less cold draught and better comfort in well-sealed, modern homes. A heat-activated Smart Fan with eco and boost settings engages when the firebox is hot enough — moving warmth into the room without running constantly from a cold start.

Elevate the look

plinth / living context
Optional 1000 mm and 1500 mm GRC plinths elevate the TFS1000 to the height and presence your room needs — the designer finish Escea shows in its TFS Series imagery. Standard or Designer flue options complete the roofline; detail on clearances, floor protector requirements and 750 mm log capacity is in the specification tables on this page. Worth confirming plinth choice, flue path and parallel versus corner placement with your installer before you lock in flooring layout.

Plan it with Wignells

freestanding wood fireplace
A flagship freestanding wood fireplace is a long-term decision — floor loading, clearances, plinth, flue routing and furniture layout all matter. Wignells can help you confirm the TFS1000 fits your space, compare TFS650 and TFS850 if you need a narrower footprint, and coordinate plinth and flue choices with your builder or designer. Visit our Melbourne showroom to discuss the TFS1000 and get clear advice before you commit. For technical data, see the Features, Product Specifications and Installation Specifications tabs on this page.
ModelTFS1000
Fuel typeWood — seasoned hardwood recommended
Max heat output8.77 kW
Heating capacityUp to 220 m² *(manufacturer guidance — confirm with Heating Area Guide)*
Average efficiency62%
Emissions1.00 g/kg
Appliance width988 mm *(without plinth)*
Appliance height606 mm *(without plinth)*
Appliance depth506 mm *(without plinth)*
Firebox opening width871 mm
Firebox opening height368 mm
Max log length750 mm
Plinth width options1000 mm · 1500 mm
Country of manufactureNew Zealand
Model TFS1000
Installation type Freestanding wood fireplace — level, load-bearing floor
Location Indoor use only — not for bathrooms, swimming pools or wet areas
Fuel supply Seasoned hardwood — comply with local smoke and burning regulations
Flue system Direct Vent natural draught — Standard or Designer flue per AS/NZS 2918
Installer requirement AHHA-approved / accredited installer per Escea installation manual
Clearance to rear — parallel install 200 mm to combustibles
Clearance to side — parallel install 370 mm to combustibles
Clearance to ceiling 1420 mm minimum above appliance
Floor offset height (H) 375 mm minimum above combustible floor *(or plinth / insulating base per manual)*
Floor protector — front extension 300 mm minimum beyond appliance front
Floor protector — side extension 200 mm minimum beyond each side
Plinth / base Required over combustible flooring within 500 mm — Escea plinth or approved heat-resistant structure
Corner installation Confirm clearances per TFS1000 Installation Manual
TV above fireplace Confirm clearances with installer — elevated temperatures may affect electronics
Electrical supply 230 V AC — required for Smart Fan *(confirm per installation manual)*
Flue, plinth & install Quoted separately — not included in firebox price
Documentation Installation Manual, Builders & Architects Information Sheet, Flue Specification Guide, Heating Area Guide, Floor Protector Information Sheet — Escea downloads

Escea TFS1000 Freestanding Wood Fireplace | Wignells Melbourne

Complete the Look

Explore accessories designed to complement your wood heater and enhance your home

Products not found.